Pcc Water Tight Powder Stand Up Pouch - Packaging Solution Designed For Material Storage And Daily Item Protection Routine - 1 KG

Water Tight Powder is ready to use waterproofing powder admixture for cement/ sand mortars & concrete suitable for use in tropical and hot climatic condition.

Area of Application

Water Tight Powder is used to waterproof cement/sand mortars, concrete, screeds and renders for walls, facades, floor toppings and jointing mortars.

Benefits

Water Tight Powder contains pore sealing and water-repelling substance which provide the following beneficial properties.

• Improved workability without increased water

• Increased impermeability

Product Information

Type: Blend of organic and inorganic chemicals

Colour/Form: Grey Powder

Packing: 1 kg bag, 20 bags per carton.

Technical Information

DENSITY: Approximately 0.9 kg/lt.

Chloride Content: NIL (EN 934-2)

Compressive Strength: increase at-least 25 %

Mortar: 1:4 (OPC and normal sand)

Water Absorption: Reduce at-least by 70%

Directions For Use:

Dosage

2% by weight of cement.

Dispensing

Water Tight Powder is added to the dry mixed cement/sand prior to the addition of water

Concrete Placing

The standard rules of good concreting practice (production as well as placing) must also be observed when using Water Tight Powder mixed mortars and concrete.

Curing

Fresh concrete must be cured properly, especially at high temperatures in order to prevent plastic and drying shrinkage.

Cleaning

Clean all equipment and tools with water immediately after use.

Notes

All technical data stated in this Product Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control.

Safety

For information and advice on the safe handling, storage and disposal of chemical products, users should refer to the most recent Material Safety Data Sheet Containing physical, ecological, toxicological and other safety-related data.